RAW MIX TO CLINKER FACTOR- Dust to Silo

 RAW MIX TO CLINKER RATIO - DUST TO SILO

You can calculate the raw mix to clinker factor by using following input data:

1. Loss on ignition of raw mix

2. Ash absorption

3. dust losses in preheater

you can also calculate following calculation by clicking them below:

1. FAN POWER CONSUMPTION

2. BAROMETRIC PRESSURE AT SEA LEVEL

3. RAW MIX TO CLINKER RATIO

4. PERCENTAGE DEGREE OF FILLING IN KILN

5. THERMAL LOADING IN KILN - FORMULA-1

6. THERMAL LOADING IN KILN - FORMULA-2

7. VOLUMETRIC LOADING IN KILN

8. MATERIAL RESIDENCE TIME IN KILN

9. CLINKER RESIDENCE TIME IN COOLER

10. EXCESS AIR CALCULATION

11. RADIATION HEAT LOSSES

12. CONVECTION HEAT LOSSES

13. FORCED CONVECTION HEAT LOSSES

14. PERCENTAGE ASH ABSORPTION IN CLINKER

15. RAW MIX TO CLINKER RATIO - DUST TO KILN

	Raw Mix to Clinker Ratio- Dust to Silo
Input Data:
1	LOI of raw Mix in %	LOI
2	Ash Absorption in %	Ash
3	Dust Losses from preheater in %	DL
Formula:
	Rawmix to clinker Ratio - Dust to Silo
	( 100 - %AA ) * 100
	( 100 - LOI ) * ( 100 - DL )
	RAWMIX TO CLINKER RATIO - DUST TO SILO
	INPUT
SN	DESCRIPTION	UNIT	VALUE
1	LOI of Raw Mix	%
2	Ash Absorption	%
3	Dust Losses From Preheater	%
	OUTPUT
RESULT
	RAWMIX TO CLINKER RATIO - DUST TO SILO	Kg rawmix/kg clinker
	Target